![]() For me only one channel was found as the case fans do not use PWM. This script will stop each fan for a few seconds to find out which fans can be controlled by which PWM handle. This will read the changes you made to /etc/modules in the previous step, and insert the new modules into the kernel. Type yes or y to have sensors-detect insert those modules into /etc/modules. I read that it might give problems if non-existing sensors are being read.Īt the end of sensors-detect, a list of modules that need to be loaded will be displayed. Be careful if you have a different mainboard. apt update & apt install lm-sensors fancontrolĬonfigure lm-sensors as follows: sensors-detectĪnswer YES ( y) to all YES/no questions. Install the lm-sensors and fancontrol packages. Open a shellsession session to the server and login. On Ubuntu/Debian (Proxmox) this can be achieved by installing the lm-sensors package to read the CPU temperature data and fancontrol to control the fan speeds. ![]() ![]() ![]() This makes the CPU temperatures rise unnecessarily high, but can be fixed by letting the OS control the fan speed instead of the mainboard. However, the fan on the Artic Freezer i32 CPU cooler I installed doesn't rotate when the mainboard (BIOS) decides the fan speed should be "low" (" a PWM fan that starts up at a higher load (40% PWM)"). This works perfectly with the case fans I installed in the front of the chassis. The Supermicro X9SCM mainboard used in my first server has 4 PWM fan connections that are normally controlled through the BIOS. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |